Digital multimeter for automotive 075 F

- Measurement direct voltage (DC): 200mV�600V and alternating voltage (AC): 200mV�600V
- Measurement direct current (DC): 2A�10A and alternating current (AC): 2A�10A
- Measurement, with clip-on ammeter 075 P: direct current (DC)200A�1000A and alternating current (AC): 200A�1000A
- Measurement resistance: 200?�20M?
- Measurement temperature with K-probe: -20�C�1000�C (0�F�1800�F)
- Measurement DWELL-angle: 0-90 (4 cyl.), 0-60 (6 cyl.), 0-45 (8 cyl.)
- Measurement RPM (4-6-8 cylinders)
- Continuity and diode testing
- Display: 3� LCD (16mm) 1999 dots with automatic indication of functions and symbols
- Automatic and manual output selection
- Automatic low-battery indication
- Automatic polarity indication
- Automatic power-off with short beep after circa 15 minutes of non-use
- Designed to comply with safety regulations IEC1010-1,CAT III 600V and EU-regulations 89/336/EEC and 73/23/EEC
- Insulation class: 600V CAT.III pollution degree 2
- Operating temperature: 0�40�C / 32�104�F H80% RH
- Storage temperature: -10�+50�C / 10�122�F H80% RH
- Max voltage to ground: 600V DC/AC
- Response in frequency: 40 - 400 Hz
- Electronic protection for all outputs
- Ramp time: 0,4 sec
- Power supply: 3 1,5V batteries type AAA
- Supplied with protection holster, pair of insulated tips, K-type temperature probe, batteries and instruction manual
- 12 months guarantee
- Dimensions 158x74x32 mm
- Weight 250 gr